A Forge S14 single folder in orange and black on the Forge plant floor

Variobend USA S Series

Single folders.

Technically unique among long folders. The geometry of the clamping beam lets your operators make profiles that are otherwise impossible.

Work envelope
280°
Working height
39.4″
Insertion depth
49.2″
Lengths
14–33′
Close-up of the orange S14 Series panel and Forge logo on a single folder

Variobend machines, by Forge

Austrian design. Built in Illinois.

Every S Series folder is assembled, wired and plumbed at our Mattoon plant, then backed by the same team for the life of the machine.

Torsion bar clamping system running the length of an S Series folder

Feature spotlight

Torsion bar clamping.

The torsion bar clamping system closes the clamping beam accurately and level, even under the load of hemming operations.

Opening height is infinitely variable from the touch-screen control, so hems can keep an even gap when you need one.

Built for flexibility

More from the S Series.

The V-standard and V-Curved clamping beam geometries side by side

Two clamping beam options

V-standard offers a 280° work envelope. The V-Curved beam adds clearance for deeper J profiles.

Ball-screw back gauge fingers on a Variobend folder

High-speed back gauge

Driven by ball screws with a range of ¼″ to 49.2″. It handles parts with a taper of up to 4″.

Operator programming a profile on the Variobend touch screen

24″ touch-screen control

Draw new profiles fast or pull from the standard library. Our technicians can connect remotely to diagnose software issues.

Watch the S Series

From drawing to finished trim.

Program a ridge cap or valley on a 14-foot single, and hear an operator’s honest take at METALCON.

All videos

In the field

S Series, on the job.

An S21 single folder installed in a customer’s building
S21 installed
An S21 single folder beside coil racks in a customer shop
S21 beside the coil
An S21 craned onto a trailer at the Forge plant
S21 heading out
An S21 single folder in a large customer shop
S21 at work
An orange S14 lifted by the overhead crane
S14 on the crane
An S21 in a new metal building
S21 in a new building

Standard folder features

Engineered to run for a lifetime.

  • Slitter on dual linear railsMounted to the chassis, clear of the beams, and up to 3× faster than the industry standard.
  • Patented angled bending beamBend profiles that are impossible with vertical bending beams.
  • US-engineered hydraulicsSAE fittings, hoses and double filters for long-term reliability.
  • Replaceable hardened segmentsOn the clamping and bending beam. Guaranteed precision for life.
  • 8″ × 12″ tubing frameEasy setup and consistent accuracy, even on an uneven floor.
Forge S.21 single folder in orange and black with its touch-screen station

Specifications

S Series sizes.

Download catalog (PDF)
ModelWorking lengthBending / cutting capacity (steel / al. / SS)Working heightInsertion depthOverall L × W × HServo motorWeight
S.1414′ 2″16 ga / 0.059″ / 0.078″ / 0.031″39.4″49.2″18′ × 6′ 1″ × 6′ 7″7 kW9,300 lbs
S.2121′16 ga / 0.059″ / 0.078″ / 0.031″39.4″49.2″24′ 7″ × 6′ 1″ × 6′ 7″7 kW12,100 lbs
S.2828′ 4″16 ga / 0.059″ / 0.078″ / 0.031″39.4″49.2″31′ 10″ × 6′ 1″ × 6′ 7″7 kW16,500 lbs
33′33′Available. Ask us for the 33-foot specifications.

Specifications from the 2026 Forge product book. Servo motor rated 7 kW. Shop requirements: 480V three-phase power at 30 amps and 90 PSI filtered compressed air. Confirm current specifications with our sales team.

Running higher volumes?

The D Series double folder bends up and down and can produce two to three times more trim.

See the D Series

Get a quote

Tell us what you fold. We’ll build the quote.

Share the profiles you run, the lengths you need and your timeline. A Forge specialist calls you within 24 hours with answers and a proposal built around your shop.

Start your quote 217.234.4700 Mon–Thu 6:30am–4:00pm · Fri 6:30am–11:30am
Call Get a quote