Variobend USA D Series

Double folders.

In most shops, far more time goes into handling long, awkward parts than bending them. The D Series bends up and down, so it multiplies output on your common profiles.

A Forge D.21 double folder in orange and black under studio lights
Work envelope
270°
Bend cycle
~2.25 s
Servo drive
15 kW
Lengths
14–33′
A Variobend D.21 double folder on the floor at the Forge plant in Mattoon, Illinois

D.21 on the Forge floor

Twenty-one feet of output.

Far more time goes into handling long parts than bending them. The D Series bends up and down, so your team spends that time producing.

Pneumatic clamping gripper with rubber-coated fingers

Feature spotlight

Pneumatic clamping gripper.

Optional fully automatic bending. Rubber-coated fingers prevent part marking, and gripper pressure is adjustable.

Built for output

More from the D Series.

Slit-Frei 2-way post-cut slitter on a double folder

Slit-Frei 2-way slitter

A 2-way, post-cut slitter. Process full-width flat sheets into finished product without pre-slitting, with less handling and scratching.

Variobend double folder with its clamping beam raised wide open

Massive clamping beam opening

Flip sheets and profiles comfortably, or unroll small coils within the frame. It often eliminates the need for a second operator.

Angled Variobend bending beam forming a trim profile

0°–135°–0° in about 2.25 seconds

A 15 kW servo drive powers the bending beam through a full 0°–135°–0° cycle fast, with a 135° maximum bending angle.

Watch the D Series

Up, down and out the door.

Sheet mode on a full 48″ flat, one-man two-piece mode, and corners and board and batten on a 21-foot double.

All videos

In the field

D Series, on the job.

A D21 double folder installed in a customer’s metal building
D21 installed
A 28-foot double folder strapped to a flatbed trailer
D28 ready to ship
A D14 double folder in a customer’s shop
D14 installed
A D21 running in a customer’s steel shop
D21 at work
A D21 lifted onto a truck by crane
D21 on the crane
A D21 delivered to a customer in Canada
D21 in Canada

Standard folder features

Engineered to run for a lifetime.

  • Slitter on dual linear railsMounted to the chassis, clear of the beams, and up to 3× faster than the industry standard.
  • Patented angled bending beamBend profiles that are impossible with vertical bending beams.
  • US-engineered hydraulicsSAE fittings, hoses and double filters for long-term reliability.
  • 24″ touch-screen controlFast profile input plus a library of standard profiles.
  • Replaceable hardened segmentsOn the clamping and bending beam. Guaranteed precision for life.
  • 8″ × 12″ tubing frameEasy setup and consistent accuracy, even on an uneven floor.
Forge D.21 double folder in orange and black

Specifications

D Series sizes.

Download catalog (PDF)
ModelWorking lengthBending / cutting capacity (CQ steel / al. / SS)Max bending angleClamp beam openingWorking heightInsertion depthOverall L × W × HBending beam speedBack gauge rangeGauge fingersServo motorWeight
D.1414′ 2″16 ga / 0.059″ / 0.078″ / 0.031″135°28.5″39.4″49.2″18′ × 6′ 1″ × 6′ 7″0°–135°–0° in approx. 2.25 sec¼″–49.2″315 kW14,100 lbs
D.2121′16 ga / 0.059″ / 0.078″ / 0.031″135°28.5″39.4″49.2″24′ 7″ × 6′ 1″ × 6′ 7″0°–135°–0° in approx. 2.25 sec¼″–49.2″415 kW19,100 lbs
D.2828′ 4″16 ga / 0.059″ / 0.078″ / 0.031″135°28.5″39.4″49.2″31′ 10″ × 6′ 1″ × 6′ 7″0°–135°–0° in approx. 2.25 sec¼″–49.2″615 kW23,000 lbs
33′33′Available. Ask us for the 33-foot specifications.

Specifications from the 2026 Forge product book. Servo motor rated 15 kW. Shop requirements: 480V three-phase power at 60 amps and 90 PSI filtered compressed air. Confirm current specifications with our sales team.

Just getting started?

The S Series single folder is an excellent option for new businesses and shops with lower production volumes.

See the S Series

Get a quote

Tell us what you fold. We’ll build the quote.

Share the profiles you run, the lengths you need and your timeline. A Forge specialist calls you within 24 hours with answers and a proposal built around your shop.

Start your quote 217.234.4700 Mon–Thu 6:30am–4:00pm · Fri 6:30am–11:30am
Call Get a quote